Pressurised Pond Filter with Built-in 11w UV 12000 Litres and AQUAECO-8000 Complete Pond Filter System
AllPondSolutions Pressurised Pond Filter with built-in UV is designed to be continuously pressurised by the supplied 10000 l/h Pond Pump, maintaining excellent water quality for healthy fishkeeping.
This filter system is designed for decorative ponds up to 12000 litres, small fish and Koi up to 9000 litres, heavily stocked Koi up to 6000 litres.
Water is fed directly from your pond pump through to the filter container and subsequently the outlet, continuously under pressure. The water outlet can be located higher than the actual filter body, making it easier to disguise around the pond -particularly useful if incorporating a waterfall!
Supplied with a fantastic new rotating cleaning handle on the head, maintaining the Pressurised Filter is now even easier! The unit will inform you when it is in need of a detailed clean using a small float, which pops-out of the head of the unit when required.
By simply turning the handle you can rinse clean the interior sponge, reducing the need to dis-assemble! Once rinsed, a separate outlet can be opened to discharge any dirty water until it runs clean and basic maintenance is complete.
Each unit is supplied with a built-in UV Light, which effectively prevents growth of algae and eliminates harmful micro-organisms and parasites which may cause fish diseases.
Specification
- Decorative Ponds: up to 12000 Litres
- Ponds with a small mix of fish: up to 9000 Litres
- Ponds with a small mix of koi: up to 6000 Litres
- Maximum Pump Flow rate: 10000L/h
- Power of UV-Clarifier: 11W
- Voltage: 220-240v
- Cable Length: 5m
- Dimensions: 380 x 380 x 510 (mm) (L x W x H)
- Filter Compartment Volume: 25 Litres
- 4 x stepped hosetails fits: 20, 25, 32 38mm
- Free 24 Month Warranty
- AQUAECO-8000 Specifications
- Model: AquaECO-8000
- Max flow rate - 8000L/H
- Wattage: 70w
- Max head - 5m
- Free 24 Month Warranty
Please note; Flexible hose is not included in with this product bundle and will need to be purchased separately.
Filtration
Water passes through the PFC-12000 in the following order
1) Pond water flows into the PFC-12000 via your pond pump
2) Initial filtration begins by removing large particles through a mixture of coarse and fine filter foams (mechanical filtration)
3) Then the water passes across bio balls that harbour good bacteria across large surface area (biological filtration)
4) Lastly the exiting water is exposed to a 11w UV steriliser capable of reducing harmful bacteria and algae
5) Clean, clear and healthy water exits your PFC-12000 and returns to your pond.
Features
Each unit supplied with 5 filter foams
3 x fine yellow- 2 x course blue
- Includes bio balls and cage
- Pressurized Filter allows exiting water to run up-hill ‚Max 3m
- Biological and Mechanical Filter chambers for more efficient removal of dissolved and solid waste
- Simple Quick Handle Cleaning System for Easy Maintenance (no need to open and clean foams all the time)
- Enables Rapid Growth of Aerobic Bacteria resulting in removal of Lethal Ammonia and Nitrite
- Able to Cope with Higher Water Flows compared to Traditional Gravity Filters
- Complete with Inlet and Outlet Hose Adapters
- Pond Pump is manufactured using high-quality highly-durable ABS particles.
- Power saving energy efficient pump
- Pump cage designed to avoid large particles entering and hindering pump performance
- Pump manufactured using high-quality durable ABS particles
- Shaft manufactured using high-quality rust-proof ceramics
- Collared outlet pipe fits multiple hose sizes
- Submersible use only
